Ga direct naar productinformatie
1 van 4

VEMS V3 universal wiring harness

VEMS V3 universal wiring harness

Normale prijs €315,52
Normale prijs Aanbiedingsprijs €315,52
Aanbieding Uitverkocht
Inclusief btw.
VEMS V3 universal wiring harness is available to buy in increments of 1
VEMS V3 universal wiring harness. Making a complete new wiring harness for an engine is very time consuming and certainly not as easy as one might think. It is easy to make a small mistake that takes hours to trace back later or burns an ecu... The universal wiring harness takes the hassle away and provides a quick and reliable solution. It can be configured for virtually any engine. Can be ordered with detachable I4, I6 or V8 injector loom configuration. (it is also possible to order just with the injector loom connector so you can make your own injector harness) Optional detachable relay / fuse assembly available.

VEMS V3 universal wiring harness.

The universal econoseal wiring harness for the Vems V3 sersies management system can be configured for virtually any engine, making an install quick and much easier.

Overview of the wiring harness branches;

  • WB 02 sub loom with connector for 7057 wb sensor
  • TPS wires; without connector
  • MAT wires; without connector
  • CLT wires; without connector
  • Ignition sub loom; without connector
  • Injection sub loom; detachable see below for more information
  • Relay / fues sub loom; detachable see below for more information
  • Trigger cable; 4 wires + shield, without connector (can be used for two trigger sensors)
  • knock cable; 4 wires + shield, without connector (can also be used for trigger sensors
  • Coolant fan wire; without connector
  • Several extra wires in various branches for optional inputs / outputs; without connector


The wiring loom has a detachable injector part (sub loom) that can be chosen in four configurations;

  • Inline 4 (I4)
  • Inline 6 (I6)
  • V8 (also convenient for V6)
  • just a 10 pin connector; to make your own injector sub loom


The harness can be ordered with or without detachable relay / fuse part. This can be convenient if you plan to use the stock vehicle relays and fuses for power supply to the various actuators (fuel pump, injectors, ignition, coolant fan, etc.).

Provisions of the relays and fuse part of the universal wiring harness;

  • Main power relay; 30A
  • Coolant fan relay; 40A
  • Fuel pump relay; 30A
  • Spare relay; 30A
  • Main power fuse; 50A
  • ECU fuse; 3A
  • Coolant fan fuse; 30A
  • Fuel pump fuse; 20A
  • Injection fuse; 15A
  • Ignition fuse; 5A
  • Ignition fuse2; 5A
  • WBO2 fuse; 5A
  • Spare fuse
Alle details bekijken