MaxxECU GEN2 SPORT, with LSU 5.2, flying lead install kit

MaxxECU GEN2 SPORT, with LSU 5.2, flying lead install kit

The MaxxECU GEN2 SPORT brings the GEN2 platform to compact performance and motorsport installations. It supports fully sequential control for up to 6 cylinders, a built-in wideband lambda controller, dual knock inputs and electronic throttle control. Wi-Fi, Bluetooth, USB-C and CAN connectivity work alongside high-speed internal logging and MTune tuning software.

Specification:

• Controls up to 6 cylinders sequentially (12 in wasted spark).
• Built-in 550 kPa MAP sensor (up to 4.5 bar / 65 PSI boost).
• Built-in wideband lambda controller (LSU 4.2, 4.9 and 5.2).
• Built-in dual knock sensor inputs.
• 4 GB internal data logging, up to 1000 Hz.
• Wi-Fi, Bluetooth and high-speed USB-C connectivity.
• Waterproof IP68-rated aluminium enclosure.
• ARM dual-core processor.
• 4 pulse inputs (VR/Hall) with selectable pull-ups.
• 12 analog inputs with selectable pull-ups.
• Built-in wideband lambda controller (LSU 4.2/4.9/5.2).
• Dual knock sensor inputs.
• Built-in 550 kPa MAP sensor.
• 6 injector outputs (high/low impedance, peak and hold).
• 6 ignition/GP outputs (selectable 5V/12V/GND).
• 7 general-purpose ground outputs.
• 2 H-bridge outputs with E-Throttle support.
• CAN bus for vehicle communication, expansion and transmission control.
• Wi-Fi communication with MTune.
• Bluetooth connectivity with MDash.
• High-speed USB-C (480 Mbit/s) for PC communication.
• Additional USB-C (12 Mbit/s) for tablet communication and charging.
• 4 GB internal logging, over 2000 channels at up to 1000 Hz.
• Built-in 3-axis accelerometer (up to 8G).
• 6-22V operating voltage.
• Superseal 1.0 connectors.
• IP68-rated powder-coated aluminium enclosure.
• Dimensions: 175 x 138 x 35 mm.
• MTune PC software for configuration, tuning and logging.
• Weight: 450 g.

Products included

• 1 pcs 2538 – MaxxECU GEN2 SPORT, unit only
• 1 pcs 2556 – MaxxECU GEN2 SPORT box
• 1 pcs 2363 – MaxxECU GEN2 MAP sensor BSP 1/8 to AN3 nipple
• 1 pcs 2364 – MaxxECU GEN2 MAP sensor BSP 1/8 to hose nipple
• 2 pcs 2368 – MaxxECU GEN2 USB rubber USB-C cover
• 1 pcs 2545 – MaxxECU GEN2 SPORT foam
• 1 pcs 2356 – MaxxECU GEN2 cable harness 1
• 1 pcs 2547 – MaxxECU GEN2 SPORT cable harness 2
• 1 pcs 2413 – MaxxECU GEN2 communication cable (USB-C to USB-A)
• 1 pcs 2414 – MaxxECU GEN2 communication cable (USB-C to USB-C)
• 1 pcs 2335 – Bosch LSU 5.2 (0258 037 010) wideband lambda sensor
• 1 pcs 1533 – Connector 6-way socket housing (LSU 4.9/5.2 wideband sensor)
• 1 pcs 2558 – MaxxECU GEN2 SPORT quickguide and wiring diagram (printed)
• 1 pcs 2412 – MaxxECU GEN2 antenna (bluetooth / WIFI)
• 2 pcs 1235 – MaxxECU sticker