MaxxECU GEN2 TRACK, unit with basic accessories in box

MaxxECU GEN2 TRACK, unit with basic accessories in box

The MaxxECU GEN2 TRACK is a standalone engine management system for performance and motorsport applications. It combines fully sequential control for up to 8 cylinders with dual wideband lambda, dual knock inputs, electronic throttle control and high-speed logging. Configure and tune the ECU with MTune, using USB-C or Wi-Fi, and connect MDash via Bluetooth.

Specification:

• Controls up to 8 cylinders sequentially.
• Built-in 550 kPa MAP sensor (up to 4.5 bar / 65 PSI boost).
• Dual built-in wideband lambda controllers (LSU 4.2, 4.9 and 5.2).
• Built-in dual knock sensor inputs.
• 8 GB internal data logging, up to 1000 Hz.
• Dual CAN bus, Wi-Fi, Bluetooth and high-speed USB-C.
• Waterproof IP68-rated aluminium enclosure.
• ARM dual-core processor.
• 6 pulse inputs (VR/Hall).
• 16 analog inputs.
• Dual built-in wideband lambda controllers (LSU 4.2/4.9/5.2).
• Dual knock sensor inputs.
• Built-in 550 kPa MAP sensor.
• 8 injector/GP outputs.
• 8 ignition/GP outputs (selectable 5V/12V/GND).
• 8 general-purpose ground outputs.
• 4 general-purpose +12V outputs.
• 4 H-bridge outputs with E-Throttle support.
• Dual CAN bus for vehicle communication, expansion and transmission control.
• Wi-Fi communication with MTune.
• Bluetooth connectivity with MDash.
• High-speed USB-C (480 Mbit/s) for PC communication.
• Additional USB-C (12 Mbit/s) for tablet communication and charging.
• 8 GB internal logging, over 2000 channels at up to 1000 Hz.
• Built-in 3-axis accelerometer.
• Superseal 1.0 connectors.
• IP68-rated powder-coated aluminium enclosure.
• MTune PC software for configuration, tuning and logging.

Products included

• 1 pcs 2492 – MaxxECU GEN2 TRACK, unit only
• 1 pcs 2523 – MaxxECU GEN2 TRACK box
• 1 pcs 2363 – MaxxECU GEN2 MAP sensor BSP 1/8 to AN3 nipple
• 1 pcs 2364 – MaxxECU GEN2 MAP sensor BSP 1/8 to hose nipple
• 2 pcs 2368 – MaxxECU GEN2 USB rubber USB-C cover
• 1 pcs 2475 – MaxxECU GEN2 TRACK Foam
• 1 pcs 2413 – MaxxECU GEN2 communication cable (USB-C to USB-A)
• 1 pcs 2414 – MaxxECU GEN2 communication cable (USB-C to USB-C)
• 1 pcs 2529 – MaxxECU GEN2 TRACK quickguide and wiring diagram (printed)
• 1 pcs 2412 – MaxxECU GEN2 antenna (bluetooth / WIFI)
• 2 pcs 1235 – MaxxECU sticker